How to Extend the Life of Your Regulator
Equipment lasts when you take care of it properly.
A regulator is a pretty hefty investment, and when you spend that much on something it makes sense to take care of it. We’re not talking a major commitment here—just a few minutes after each day of diving, following some simple steps to help extend the life and performance of what is really the most important component of your life support system.
This is all it takes:
1. After a day’s diving, making sure the dust cover is in place, give the reg a quick rinse with a low-pressure hose to knock off any big chunks of dirt, sand or salt.
2. Drop the reg in a bucket of fresh water or the bathroom sink and let it soak for 10 minutes or so.
3. During the soak, swish the second stage around in the water (without depressing the purge button) to get water flowing through the mouthpiece and exhaust tee.
4. Pull the reg out of the water and give it another gentle rinse, making sure you hit all swivels and hose connections. This will require pulling back the hose protectors—if your reg has them—so you can get at the connections to the first stage.
5. Give the first stage and second stage a gentle shake to clear any excess water from the yoke and the exhaust tee. Then lay it loosely coiled out of direct sunlight to dry.
Invest in a specially made padded bag to keep regulators (and other delicate instruments) safe during transport.